In the winter, a fireplace is a place for gathering with friends and family, but in the heat of summer, when fires are not permitted in fireplaces, what do you do with it? Painting your fireplace gives you a clean slate for color, texture, and interest.
To paint the inside of a fireplace, one would need to first assess the surface that needs to be painted. The surface should be free of any loose paint, dirt, or other debris. Once the surface has been cleared, it can be primed with a suitable primer. Once the primer has dried, the desired paint color can be applied in multiple coats.
This guide will teach you how to safely and effectively paint the inside of your fireplace. Painting your fireplace can give it a fresh new look and also help protect it from heat and corrosion. However, there are a few things you need to keep in mind before getting started.
|Giani Brick Transformations Whitewash Paint for Brick...
|Rust-Oleum 7778502 High Brush On Paint Heat Protective...
|Rutland Fire Bricks for Fireplaces & Woodstoves, 2700F,...
How to Paint Inside of Fireplace?
Paint the inside of the fireplace to make it look more attractive. Before painting your fireplace, make sure you clean the whole thing thoroughly. A good cleaning is crucial to ensure that the new paint goes smoothly. Also, you need to ensure some basic arrangements. Things will be easier if you’ve followed some steps.
- Start the whole work by preparing your workspace. If you don’t have enough room, you may end up spending a lot of time searching for things.
Choose the paint very carefully. You must get good quality paint for a longer-lasting and shinier effect. The paint must be a toxic element and heat resistant paint. Some reputed paint companies here would be: Rust-Oleum and Pro High Temperature Paint.
- Make sure to have plenty of paper towels and rags nearby. All these will come in use when you need to wipe away the excess paint.
- Before you start painting make sure there is enough space for you to spread out all your paints.
- Don’t forget to match the colors with the existing ones in the room.
If you want to paint of fireplace yourself, you’ll need to follow these steps:
Step 1: Clean And Protect:
First, vacuum out the fireplace. Then, if there are ashes or dust, clean them up. Make sure to cover your floor with a drop cloth before starting to paint.
Before you start painting, try putting down newspaper or plastic sheeting.This will protect your floors and furniture. Also, lay down a tarp to catch any spills.
We taped off the parts of the house we didn’t want to be painted. We did this before we started painting. We also used masking tape to help us stay within the lines.
When you’re done cleaning, you should remove all the loose dirt and ash. Get a damp rag and soak up as much water as possible.
Step 2: Prime:
Once we had our workspace set up, we began painting.
The first step is preparing the area where you want to paint.This helps prevent the paint from peeling later on. Apply two coats of primer. Wait until each coat dries completely before applying the next.
Step 3: paint:
Next, apply three coats of exterior latex paint. Ensure that each coat dries thoroughly before moving on to the next. When you’re finished, give the whole area another good scrubbing.
You should mix the paint thoroughly before painting. Paint the inside of your fireplace first, then paint the rest of the room. Don’t use too much color because if you do, you’ll need to add more later. Start at the top of the fireplace and work your way down from there.
Note: After you’ve painted the fireplace, you can move on to the other parts of the house. Once you’ve finished, you can wash away the leftover paint. Clean up the mess, and you’re all done.
Read Next: Guide on How to Paint Marble Fireplace
Painting inside of a fireplace requires some special techniques. If you aren’t careful, then you could ruin your entire project. So, you need to take care when doing this kind of job. These are the additional tips for better outcomes:
- High-temperature paints go a long way. We bought a small amount of them because we didn’t want to waste too much. They are straightforward to work with, and they last longer than regular paints. It’s worth investing in these kinds of colors.
- Vacuum up all the ashes and debris before starting the fire. Start with the most manageable parts first. You’ll be more likely to get a better result if you try to clean things up before you start.
- If you use an electric stove, prop open the damper so that the heat doesn’t escape. Otherwise, you may find yourself getting cold while you’re trying to paint.
- When painting a fireplace the most important thing is keeping the temperature at a constant temperature.Keep the door open, and then you won’t get a nice even coating. Instead, you’ll end up with uneven patches of paint.
- Painting inside of a fireplace is one of those projects that will require a lot of patience. Don’t expect to complete it quickly. It takes time to learn how to mix different types of paints properly. Once you’ve mastered that skill you’ll be able to produce stunning results.
- You can buy a fireplace sprayer from a hardware store. These devices are designed specifically for spraying paint into tight spaces like chimneys and fireplaces.
- You can use a brush, but it won’t be easy to control the flow of paint. Plus, you’ll have to deal with drips. That means you’ll have to wipe off the excess paint constantly.
- You don’t need to worry about dripping paint while using a roller.Just roll out a thick coat of paint and wait for it to dry.
Painting inside of a fireplace has been done since the beginning of time. Cave paintings from over 30,000 years ago show evidence of fireplaces being painted. The idea behind painting a fireplace is to create a focal point in your room. This is a handy thing if you want to give your house a specific area a unique look. You can skip hiring a professional painter or spend thousands of dollars on supplies. All you need is a little creativity, a simple process to follow and a few simple tools.